Jump to content
Heritage Owners Club

PAF's


HenrikB

Recommended Posts

Posted

I've decided to swap the SD pearly gates in my H150 with a set of more mid-honky PAF clones.
I've had good experience with Jason Lollar's low wind Imperials but I wanna try something new and I've heard good things about throbak, wolfetone etc...

Do you guys have any other suggestions?

Posted

hi, henrik. i'm just a boring ol' Seth Lover fan. but, if i were to get "creative" with pickups i would investigate the Bare Knuckle brand, made in england. the BK "stormy monday" model intrigues me.

 

good luck with your quest! eljay

Posted

i'm a big fan of those PRS 57/08s i have in my 150.

you should check also the bareknuckles abraxas.

Posted

All of the above plus the hand made Kent Armstrong. I could not be more pleased with the Throbaks that came on my 575. Jon has been to one of our forum PSPs, has the original PAF winder. Mine came out of a set of ten he sent to Heritage.

Posted
hi, henrik. i'm just a boring ol' Seth Lover fan. but, if i were to get "creative" with pickups i would investigate the Bare Knuckle brand, made in england. the BK "stormy monday" model intrigues me.

 

good luck with your quest! eljay

 

I'd have to agree with that...

Posted

I like Wolfetone Legends a lot....they're pretty honky

 

 

0.jpg

 

 

 

 

 

also use & am a fan of Lollar Imperial's, Throbak's, Seth's

 

it gets to a point where it doesn't really matter, they all sound very good!!

Posted

I own/use 5 sets of Throbaks, so I guess you know where I cast my vote.....

Posted

I swaped the SD 59's of my H 150 with Amber Spirit PAF 59 (They are now named "Spirit of 59").

 

Not the cheepest pups under the sun, but worth every EURO or Dollar. They come from Berlin/Germany and the really sound great. A wonderful vintage PAF Tone.

 

Check this out:

 

 

and this one, too:

 

 

But I'm sure the differences between Amber PAF 59's or Throbacks or other pups, are very little.

 

Enjoy

Posted

those amber pickups sound great- I love Bare Knuckle pickups and have several sets....would love to try some Kloppmman's!

Posted
I have Lindy Fralin pure PAF in my H150 and love them!!

 

Same sentiment with Fralin Pure PAFs in my H555

  • 4 weeks later...
Posted

I got a bit carried away so I ended up with a set of Lollar regular winds, new bone nut, RS electronics premium vintage kit, Tonepros bridge and aluminum tailpiece... This should do the trick, eh? Ready, set, go!!

 

391214_443598762341705_391302138_n.jpg

Posted

I metWCR's builders in 2008.

I can also highly rectoend TIM Mills amazing Bare Knuckles.

TIM is the real deal and can wind anything.

I have conversed with him on other matters and found him to be most helpful and knowledgable.

Posted

I got a bit carried away so I ended up with a set of Lollar regular winds, new bone nut, RS electronics premium vintage kit, Tonepros bridge and aluminum tailpiece... This should do the trick, eh? Ready, set, go!!

 

391214_443598762341705_391302138_n.jpg

 

Wow, what a project! That is a pretty guitar and its going to sound even better!

Posted

All of the above plus the hand made Kent Armstrong. I could not be more pleased with the Throbaks that came on my 575. Jon has been to one of our forum PSPs, has the original PAF winder. Mine came out of a set of ten he sent to Heritage.

+1 for Kent Armstrong. I have the jazz pickup and really like it in my semi-hollow.

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...