Gianluca Posted February 10, 2020 Author Posted February 10, 2020 thanks Steiner meanwhile I found: - https://www.zymol.com/bridgefretandfingerboardprotectant.aspx - https://bellacura.de/en/produktbeschreibungen/ - https://www.montysguitars.com/collections/department-of-component/products/montys-instrument-food-guitar-wax there are lots of products out there
pressure Posted February 10, 2020 Posted February 10, 2020 Here is an image I poster 2 years ago. This is the oil I use (F-One Oil) with a good quality cloth. That 2 fluid ounce bottle is probably enough for 100 years of fretboards no mater how many guitars you have (thats right I'm talking about you Mr. Brentley). Like Mr. Miyagi says "wipe on, wipe off".
Gianluca Posted February 10, 2020 Author Posted February 10, 2020 meanwhile:https://luxe-radio.com/products/1952-1956-grey-tiger-single-wax-impregnated-02mf-capacitor-black-ink
Gianluca Posted February 11, 2020 Author Posted February 11, 2020 spent some time adjusting PUs height what a tone, I love it I hope to upgrade to VIP pots and Tiger caps in the near future
TalismanRich Posted February 12, 2020 Posted February 12, 2020 When you get around to buying pots, this might be handy to have. Its the coding system that CTS uses on their pots. CTS 450G.pdf I went with 30% tapers with 10% tolerance, but I measured each one before I put them in and chose ones withing 1% of 500K. I can't say that it made it sound any better, but I like the smoothness of the taper better.
rockabilly69 Posted February 12, 2020 Posted February 12, 2020 11 hours ago, Gianluca said: spent some time adjusting PUs height what a tone, I love it I hope to upgrade to VIP pots and Tiger caps in the near future I think the Grey Tigers are overpriced and a bit of snake oil, the are dressed up caps that aren't real grey tigers, I recommend getting something like this. https://www.ebay.com/itm/Les-Paul-Wiring-Harness-Kit-550k-Centralab-Spec-VIP-Short-Shaft-131P-Vitamin-Q/183255183742?hash=item2aaadc317e:g:cRYAAOSw4qxarYPc I have spraque vitamin Q .022s in many of my guitars, and practice what I preach, here's my last wiring job... These pots are in this guitar... And this is what it sounds like...
Gianluca Posted February 12, 2020 Author Posted February 12, 2020 rockabilly I agree with you, those are psychological kind of prices, I threw a stone to see the waves in the Pond ? thanks for your suggestions I built pedals and done some kind of repairs time ago, some knowledge is still there but not comparable with some of you guys&gals current status of my Gold Top
Gianluca Posted February 12, 2020 Author Posted February 12, 2020 13 hours ago, TalismanRich said: When you get around to buying pots, this might be handy to have. Its the coding system that CTS uses on their pots. CTS 450G.pdf 441.07 kB · 0 downloads I went with 30% tapers with 10% tolerance, but I measured each one before I put them in and chose ones withing 1% of 500K. I can't say that it made it sound any better, but I like the smoothness of the taper better. Thank you TalismanRich, I downloaded the pdf and will read it I thought the pots to be the VIPs that rockabilly69 linked in some prev comment but surely I'd better understand
kennyv4 Posted February 21, 2020 Posted February 21, 2020 You have tried a lot of adjustments. I am wondering if the previous owner flied the nut to fit heavier gauge strings which could cause fret buzzing. You may want to have the guitar setup by a qualified luthier .
kennyv4 Posted February 21, 2020 Posted February 21, 2020 You have tried a lot of adjustments. I am wondering if the previous owner flied the nut to fit heavier gauge strings which could cause fret buzzing. You may want to have the guitar setup by a qualified luthier . Senior moment, submitted this under the wring thread.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.